Pantograph Lift - DUO-BOX "COVER" PB1 parking system (car-lift) with person on board
With this model the driver can stay on board.
It can be inserted inside or outdoor and it can be with a stroke from 1800 to 6000 mm.
Our firm is at your disposal for any other information.
- Single
pantograph series B/1 and B/2S with
hydraulic
rams for the up and down movements.
- Twin pantograph series A/1 and A/1S.
- Load-bearing platform complete with two side
uprights positioned on the platform to cover
the rams.
Standard
working capacity: 3000 kg
Pit
depth:
550
mm for series B/1 and B/2S
910 mm for series A/1 and A/1S
Standard
pit dimensions:
5360
x 2500 mm
Path
of lift:
Series
B/1 and B/2S: 1800 up to 3500 mm
Series A/1 and A/1S: 3600 up to 6000
mm
Rotating platform up to 360°:
With this system you have at the entrance the overall dimensions of a standard car lift and at the basement the possibility to turn the platform up to 360° with different programmed positions.
Rotanting platform up to 180°
Rotating platform up to 180°:
with this system you have at the entrance the overall dimensions of a standard car lift and at the basement the possibility to turn the platform up to 180° with different programmed positions.
Electric
control parking system with hydraulic movement for
traslating motor vehicles between defined floors
with:
- elevation system formed by two side frames, assembled
with guides in hot profiled ST52.3 stell (EN ISO
9001), complete with sliding trolleys equipped with
bearings suitable for radial and axial loads.
The movement is performed by hydraulic cylinders
equipped with hose rupture valves, counter balance
valves and a stabilizer bar for the hydraulic flow.
- self-supporting platform.
Standard
working capacity: 3000 kg
Pit
depth:
200
mm on the site and 500 mm in the middle
Standard
pit dimentions:
5360
x 2500 mm
Path
of lift:
3000
up to 11000 mm
Installed
power 4 kW, voltage380 Volt three-phase.
